Yayınlar

Yayın Adı Bölümazalan sırada Birim Yayın Türü İndeksi Tarihi
Wisnom, M.R., Gigliotti, M., Ersoy, N.B., Campbell, M., Potter K.D., “Mechanisms Generating Residual Stresses and Distortion During Manufacture of Polymer–Matrix Composite Structures, Composites Part A-Applied Science and Manufacturing, 37, 4, 522-529 2006. Makina Mühendisliği Mühendislik Fakültesi Makale 2006
Balıkçı, E., Abbaschian, R., “The Seebeck Coefficient of the Solid and Liquid Germanium”, Journal of Materials Science, 40, 1475-1479, 2005. Makina Mühendisliği Mühendislik Fakültesi Makale 2005
Baykara, M. Z., Özkan, T., İpekoğlu, M., Altıntaş, S., “Hidroksiapatit Üretimi İçin Dana Femuru Yüzey Alanının Teorik Maksimizasyonu”, BİYOMUT, 2005. CD Makina Mühendisliği Mühendislik Fakültesi Bildiri 2005
Birol, Y., Bozkurt, U., Önsel, M., Çakır, O., Altıntaş, S., “AA 6082 Feedstock Production for Thixoforming Via Coaling Slope and SMA Processes”, EUROMAT 2005, 2005. CD Makina Mühendisliği Mühendislik Fakültesi Bildiri 2005
Bozkurt, U., Birol, Y., Önsel, M., Çakır, O., Altıntaş, S., “A357 & AA6082 Feedstock Production for Thixoforming Via Ooling Slope”, İstanbul 2005, 2005. CD Makina Mühendisliği Mühendislik Fakültesi Bildiri 2005
Bykova, S.V., Golyshev, V.D., Gonik, M.A., Tsvetovsky, V.B., Balıkçı, E., Deal, A., Abbaschian, R., Marchenko, M.P., Igor, V. Frjazinov, V., Vlasov, V.N., Serebrjakov, J.A., “The Experimental & numerical Investigation of Instability of Faceted Ge Doped by Sb Growth on the Base of AHP Method”, The Journal of Crystal Growth, 275, e229-e236, 2005. Makina Mühendisliği Mühendislik Fakültesi Makale 2005
İpekoğlu, M., Altıntaş, S., “Sintering of Naturally Derived Hydroxyapatite with Boron Oxide Addition”, İspanya 2005, 2005. CD Makina Mühendisliği Mühendislik Fakültesi Bildiri 2005
Oal, F., Altıntaş, S., “Bir Diş Implantının Sonlu Elemanlar Yöntemi ile Çözümlenmesi”, BİYOMUT, 2005. CD Makina Mühendisliği Mühendislik Fakültesi Bildiri 2005
Önsel, M., Birol, Y., Bozkurt, U., Kubilay, C, Altıntaş, S., “AA6082 Feedstock Production for Thixoforming Via SMA Process”, İstanbul 2005, 2005. CD Makina Mühendisliği Mühendislik Fakültesi Bildiri 2005
Özkan, T., Baykara, M.Z., Ulutaş, İ., Alkan, A., Gürol, A., Savaş, M.A., “Hafif Kara Taşıtlarında Güneş Enerjisi Kullanımının Araç Tasarımı ve Malzeme Seçimi Üzerine Etkileri”, Mühendis ve Makina, 46, 548, 43-51, 2005. Makina Mühendisliği Mühendislik Fakültesi Makale 2005
Roy, I., Balıkçı, E., Ibekwe, S., Raman, A., “Precipitate Growth Activation Energy Requirements in the Duplex Size & Distribution in the Superalloy IN738LC”, Journal of Materials Science, 40, 6207-6215, 2005. Makina Mühendisliği Mühendislik Fakültesi Makale 2005
Sönmez, F.Ö., “Precision and Accuracy in Generating Globally Optimum Shapes”, Proceedings of the International Workshop on Global Optimization, I. Garcia, L.G. Casado, E.M.T. Hendrix, B. Toth (Derleyeler), 231-236, San Jose, Spain, 2005. Makina Mühendisliği Mühendislik Fakültesi Bildiri 2005
Hulbert, G.M., Dede, E., Yılmaz, Ç., Ma,Z.D., Kikuchi, N., "Analysis and Design of Materials and Structures for Attenuating Vibration and Acoustic Response", Proceedings of the 6th International Conference on Computation of Shell and Spatial Structures, Ithaca, NY, USA, 2008. Makina Mühendisliği Mühendislik Fakültesi Bildiri 2008
Aydıner, C.C., Brown, D.W., Mara, N.A., Almer, J., Misra, A., “In Situ X-ray Investigation of Freestanding Nanoscale Cu-Nb Multilayers under Tensile Load”, Applied Physics Letters, 94, (3), 031906, 2009. Makina Mühendisliği Mühendislik Fakültesi Makale 2009
Ertürk, H., Howell, J.R., “Complete Modeling of a Light-Pipe Radiation Thermometer ın a Rapid Thermal Processing System”, Proceedings of ASME 2008 International Mechanical Engineering Conference and Exhibition, Boston, USA, 2008. Makina Mühendisliği Mühendislik Fakültesi Bildiri 2008
Gökdemir, H., Yılmaz, M., Mahmutyazıcıoğlu, N., Uçak, T., Altıntaş, S., “The use of Aluminum Foam in the Explosion Resistant Curtain Wall Systems, Cellular Metals for Structural and Functional Applications”, CELLMET 2008 Bildiriler Kitabı, 113-118, Farunhofer IFAM, Dresden, Germany, 2009. Makina Mühendisliği Mühendislik Fakültesi Bildiri 2009
İpekoğlu, M., Altıntaş, S., “Mikrodalga ile Nano Boyutlu Kalsiyum Eksik Hidroksiapatit Sentezlenmesi”, 14. Biyomedikal Mühendisliği Ulusal Toplantısı Bildiriler Kitabı, IEEE Xplore, 1-4, İzmir, 2009. Makina Mühendisliği Mühendislik Fakültesi Bildiri 2009
Öztürk, M., Sönmez, F.Ö., “Optimization of Forging Processes with a Concurrent Approach”, Proceedings of 5th International Conference and Exhibition on Design and Production of Machines and Dies/Molds, 129-138, Kuşadası, 2009. Makina Mühendisliği Mühendislik Fakültesi Bildiri 2009
Son, O., Çetiner, N.L.O., Tevrizci, G., Atalık, K., “Effects of Polymer Addition to Structure and Properties of the Flow Around a Circular Cylinder”, Proceedings of the 5th Ankara International Aerospace Conference, METU, Ankara, 2009. Makina Mühendisliği Mühendislik Fakültesi Bildiri 2009
Savaş, M.A., Başkaya, Ö., Altınel, S.A., Altıntaş, S., “Semi-solid Forming of Some CCommercial Aluminium Alloys”, Proceedings - ICFG (International Cold Forging Group) 37th Plenary Meeting, İstanbul, 2004. Makina Mühendisliği Mühendislik Fakültesi Bildiri 2004
Sönmez, F.Ö, “İki Boyutlu Parçaların Optimum Şekil Tasarımı,” VIII. Otomotiv ve Yan Sanayii Sempozyumu, TMMOB, Bursa, 2003. Makina Mühendisliği Mühendislik Fakültesi Bildiri 2003
Özgül, O., Güney, M., Eşkinat, E., “An Integrated  Structural Modelling, Optimal Placement  and Control Approach using Piezoelectric Transducers”, Mechatronics 2004 Conference, Ankara, 2004. Makina Mühendisliği Mühendislik Fakültesi Bildiri 2004
Sönmez, F.Ö, “İki Boyutlu Parçaların Optimum Şekil Tasarımı,” VIII. Otomotiv ve Yan Sanayii Sempozyumu, TMMOB, Bursa, 2003. Makina Mühendisliği Mühendislik Fakültesi Bildiri 2003
Özgül, O., Güney, M., Eşkinat, E., “An Integrated  Structural Modelling, Optimal Placement  and Control Approach using Piezoelectric Transducers”, Mechatronics 2004 Conference, Ankara, 2004. Makina Mühendisliği Mühendislik Fakültesi Bildiri 2004
Eşkinat, E., “Dynamic Consistency Relations for Process Modeling”, Aiche Journal, 49, 8, 2224-2227, 2003. Makina Mühendisliği Mühendislik Fakültesi Makale 2004
Jabbari, F., Köse, İ.E., “Rate- and Magnitude Bounded Actuators: Scheduled Output Feedback Design”, International Journal of Robust and Nonlinear Control, 14,  13-14, 1169-1184, 2004. Makina Mühendisliği Mühendislik Fakültesi Makale 2003
Örs, H., Yılmaz, S.L., “Modélisation par Elements Finis de la Dissémination Dans le Détroit d’Istanbul”, La Houille Blanche, I, 78-82, 2004. Makina Mühendisliği Mühendislik Fakültesi Makale 2004
Shatz, M., Diesendruck, G., Martinez-Beck, I., Akar, D., “The Influence of Language and Socioeconomic Status on Children’s Understanding of False Belief”, Developmental Psychology, 39, 4, 717-729, 2003. Makina Mühendisliği Mühendislik Fakültesi Makale 2004
Howell, J.R., Daun, K.J., Ertürk, H., Gamba, M., Hosseini-Sarvari, M., “The use of Inverse Methods for the Design and Control of Radiant Sources, JSME International Journal, Series B, Fluid and Thermal Engineering, 470-478, 2003. Makina Mühendisliği Mühendislik Fakültesi Makale 2003
Cheng, S. Y., Santi, M. M., Celik, M., Martinez-Sanchez, M. and Peraire, J., Hybrid PIC-DSMC Simulation of a Hall Thruster Plume on Unstructured Grids, Computer Physics Communications, 73-79, 2004. Makina Mühendisliği Mühendislik Fakültesi Makale 2004
Ertürk, H., Ezekoye, O,A,, Howell, J,R,, “Boundary Condition Design to Heat a Moving Object at Uniform Transient Temperature, ASME Journal of Manufacturing Science and Engineering, 619-626, 2004. Makina Mühendisliği Mühendislik Fakültesi Makale 2004
Ersoy, N., Potter, K., Wisnom, M.R., et al., “An Experimental Method to Study the Frictional Processes during Composites Manufacturing” , Composites Part A-Applied Science and Manufacturing, 1536-1544, 2005. Makina Mühendisliği Mühendislik Fakültesi Makale 2005
Ersoy, N., Potter, K., Wisnom, M.R., et al., “Development of Spring-in Angle during Cure of a Thermosetting Composite”,Composites Part A-Applied Science and Manufacturing, 1700-1706, 2005. Makina Mühendisliği Mühendislik Fakültesi Makale 2005
Uzkan, T., “Effects of Coolant Air Inlet Conditions on Turbulent Flow Between A Turbine Disk and Lis Casing”, Journal of Engineering for Power Transactions of the ASME, 103, 4, 637-644, 1981. Makina Mühendisliği Mühendislik Fakültesi Makale SCI-E 1981
Biringen, S., Reynolds, W.C., “Large Eddy Simulation of the Shear Free Turbulent Boundary Layer”, Journal of Fluid Mechanics, 103, FEB, 53-63, 1981. Makina Mühendisliği Mühendislik Fakültesi Makale SCI-E 1981
Ceranoğlu, A.N., Pao, Y.H., “Propagation of Elastic Pulses and Acoustic Emission in A Plate 1. Theory”, Journal of Applied Mechanics Transactions of the ASME, 48, 1, 125-132, 1981. Makina Mühendisliği Mühendislik Fakültesi Makale SCI-E 1981
Ceranoğlu, A.N., Pao, Y.H., “Propagation of Elastic Pulses and Acoustic Emission in a Plate 2. Epicentral Responses”, Journal of Applied Mechanics Transactions of the ASME, 48, 1, 133-138, 1981. Makina Mühendisliği Mühendislik Fakültesi Makale SCI-E 1981
Ceranoğlu, A.N., Pao, Y.H., “Propagation of Elastic Pulses and Acoustic Emission in A Plate 3. General Responses”, Journal of Applied Mechanics Transactions of the ASME, 48, 1, 139-147, 1981. Makina Mühendisliği Mühendislik Fakültesi Makale SCI-E 1981
Mengütürk, M., Sverdrup, E.F., “A Theory for Fine Particle Deposition in Two Dimensional Boundary Layer Flows and Application to Gas Turbines”, Journal of Engineering for Power Transactions of the ASME, 104, 1, 69-76, 1982. Makina Mühendisliği Mühendislik Fakültesi Makale SCI-E 1982
Vardar, Ö., “Fatigue Crack Propagation Beyond General Yield”, Journal of Engineering Materials and Technology-Transactions of the ASME, 104, 3, 192-199, 1982. Makina Mühendisliği Mühendislik Fakültesi Makale SCI-E 1982
Kısakürek, S.E., “Grain Refinement of Aluminum Alloy Ingot Castings by Means of Melt Agitation During Solidification Using Naphthaline”, Journal of Metals, 34, 8, 8-8, 1982. Makina Mühendisliği Mühendislik Fakültesi Toplantı Özeti SCI-E 1982
Wenglarz, R.A., Mengütürk, M., “Use of Cascade and Small Turbine Tests to Determine Erosion of Utility Turbines”, Journal of Engineering for Power Transactions of the ASME, 104, 1, 58-63, 1982. Makina Mühendisliği Mühendislik Fakültesi Makale SCI-E 1982
Mengütürk, M., Güneş, D., Mimaroğlu, H.K., Sverdrup, E.F., “Blade Boundary Layer Effect on Turbine Erosion and Deposition”, Journal of Fluids Engineering Transactions of the ASME, 105, 3, 270-276, 1983. Makina Mühendisliği Mühendislik Fakültesi Makale SCI-E 1983
Demirkol, M., Kısakürek, S.E., “On the Relations Between Ball Lindentation Hardness Measurements and the Tensile Flow Behavior of Some Ferrous and Non-ferrous-metals”, Materials Science and Engineering, 59, 2, 197-205, 1983. Makina Mühendisliği Mühendislik Fakültesi Makale SCI-E 1983
Güneş, D., Mengütürk, M., “A Finite Element Computer Code to Calculate Full 3-D Compressible Potential Flow in Turbomachinery”, Mechanical Engineering, 106, 8, 84-84, 1984. Makina Mühendisliği Mühendislik Fakültesi Toplantı Özeti SCI-E 1984
Kısakürek, S.E., “An Experimental Investigation into the Formation of an Equiaxed Zone in Ingot Casting Pb-Sb Alloy System”, Journal of Materials Science, 19, 7, 2289-2305, 1984. Makina Mühendisliği Mühendislik Fakültesi Makale SCI-E 1984
Aytanç, T., Baybalı, S., Kısakürek, S.E., “On the Relationship Between Grain Macrostructure and Solute Content in Laboratory Scale Hypoeutectic Pb-Sb Ingot Castings”, Journal of Materials Science Letters, 3, 12, 1087-1089, 1984. Makina Mühendisliği Mühendislik Fakültesi Makale SCI-E 1984
Enginol, T.B., “On the Asymptotic Stability of Nuclear Reactors with Arbitrary Feedback”, Nuclear Science and Engineering, 90, 3, 231-235, 1985. Makina Mühendisliği Mühendislik Fakültesi Makale SCI-E 1985
Altıntaş, S., Morris, J.W., “Computer Simulation of Dislocation Glide 1. Comparison with Statistical Theories”, ACTA Metallurgica, 34, 5, 801-807, 1986. Makina Mühendisliği Mühendislik Fakültesi Makale SCI-E 1986
Altıntaş, S., Morris, J.W., “Computer Simulation of Dislocation Glide 2. Comparison with Experiments”, ACTA Metallurgica, 34, 5, 809-816, 1986. Makina Mühendisliği Mühendislik Fakültesi Makale SCI-E 1986
Telli, A.I., Kısakürek, S.E., “Effect of Antimony Additions on the Silicon Spacing in Directionally Solidified Al-Si Eutectics”, Scripta Metallurgica, 20, 12, 1657-1660, 1986. Makina Mühendisliği Mühendislik Fakültesi Makale SCI-E 1986
Mengütürk, M., Güneş, D., Erten, M., Sverdrup, E.F., “Multistage Turbine Erosion”, Journal of Turbomachinery Transactions of the ASME, 108, 2, 290-297, 1986. Makina Mühendisliği Mühendislik Fakültesi Makale SCI-E 1986
Kısakürek, S.E., “On Application of the Carbon Extraction Replica Technique for the Determination of 2nd Phase Particles Dispersed Into Metal Matrix”, Metallography, 19, 1, 19-25, 1986. Makina Mühendisliği Mühendislik Fakültesi Makale SCI-E 1986
Telli, A.I., Kısakürek, S.E., “Effect of Antimony Additions on Hardness and Tensile Properties of Directionally Solidified Al-Si Eutectic Alloy”, Materials Science and Technology, 4, 2, 153-156, 1988. Makina Mühendisliği Mühendislik Fakültesi Makale SCI-E 1988
Vardar, Ö., “Effect of Single Overload in FCP”, Engineering Fracture Mechanics, 30, 3, 329-335, 1988. Makina Mühendisliği Mühendislik Fakültesi Makale SCI-E 1988
Tunç, M., Uysal, M., Özmen, A., “Exergy Analysis of Solar Assisted Heat Pump Systems”, Applied Energy, 29, 1, 1-16, 1988. Makina Mühendisliği Mühendislik Fakültesi Makale SCI-E 1988
Türkay, O., Ulsoy, A.G., “Frequency Versus Time Domain Parameter Estimation Application to A Slot Milling Operation”, Mechanical Systems and Signal Processing, 2, 3, 265-277, 1988. Makina Mühendisliği Mühendislik Fakültesi Makale SCI-E 1988
Enginol, T.B., “On A Possible Varying G Cosmology”, Astrophysical Journal, 329, 2, 551-555, 1988. Makina Mühendisliği Mühendislik Fakültesi Makale SCI-E 1988
Enginol, T.B., “An Inflationary Cosmology with Varying G”, Physics Letters A, 139, 3-4, 127-129, 1989. Makina Mühendisliği Mühendislik Fakültesi Makale SCI-E 1989
Vardar, Ö., Kalenderoğlu, V., “Effect of Notch Root Radius on Fatigue Crack Initiation”, Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing, 114, , L35-L38, 1989. Makina Mühendisliği Mühendislik Fakültesi Mektup SCI-E 1989
Altın, V., Enginol, T.B., “A Mechanical Analog in Nonlinear Nuclear Reactor Stability Analysis”, IEEE Transactions on Automatic Control, 35, 11, 1235-1238, 1990. Makina Mühendisliği Mühendislik Fakültesi Bilimsel Not SCI-E 1990
Vardar, Ö., Yıldırım, N., “Crack Growth Retardation due to Intermittent Overloads”, International Journal of Fatigue, 12, 4, 283-287, 1990. Makina Mühendisliği Mühendislik Fakültesi Makale SCI-E 1990
Yıldırım, N., Vardar, Ö., “Study of Periodic Overloads at a Fixed Overload Ratio”, Engineering Fracture Mechanics, 36, 1, 71-76, 1990. Makina Mühendisliği Mühendislik Fakültesi Makale SCI-E 1990
Cheng, W., Finnie, I., Vardar, Ö., “Measurement of Residual Stresses Near the Surface Using the Crack Compliance Method”, Journal of Engineering Materials and Technology-Transactions of the ASME, 113, 2, 199-204, 1991. Makina Mühendisliği Mühendislik Fakültesi Makale SCI-E 1991
Pakdemirli, M., Suhubi, E.S., “Boundary Layer Theory for 2nd Order Fluids”, International Journal of Engineering Science, 30, 4, 523-532, 1992. Makina Mühendisliği Mühendislik Fakültesi Makale SCI-E 1992
Savaş, M.A., Altıntaş, S., “Control of Mechanical and Wear Properties of a Commercial Al-Si Eutectic Alloy”, Journal of Materials Science, 27, 5, 1255-1260, 1992. Makina Mühendisliği Mühendislik Fakültesi Makale SCI-E 1992
Cheng, W., Finnie, I., Vardar, Ö., “Deformation of an Edge Cracked Strip Subjected to Normal Surface Traction on the Crack Faces”, Engineering Fracture Mechanics, 42, 1, 97-107, 1992. Makina Mühendisliği Mühendislik Fakültesi Makale SCI-E 1992
Cheng, W., Finnie, I., Vardar, Ö., “Estimation of Axisymmetrical Residual Stresses in a Long Cylinder”, Journal of Engineering Materials and Technology-Transactions of the ASME, 114, 2, 137-140, 1992. Makina Mühendisliği Mühendislik Fakültesi Makale SCI-E 1992
Pakdemirli, M., Suhubi, E.S., “Similarity Solutions of Boundary Layer Equations for 2nd Order Fluids”, International Journal of Engineering Science, 30, 5, 611-629, 1992. Makina Mühendisliği Mühendislik Fakültesi Makale SCI-E 1992
Ekici, B., Güngör, E., Akyüz, M., Altıntaş, S., “2D and 3D Modeling Comparison for a Human 1st Premolar to Determine an Appropriate Cavity Filling Material”, Computational Biomedicine, 263-273, 1993. Makina Mühendisliği Mühendislik Fakültesi Bildiri CPCI-S 1993
Ekici, B., Altıntaş, S., “Determination of the Shear Strength Requirement for the Adhesive Used Between Cavity Filling Materials and Dentin”, Advances in Engineering Software, 18, 2, 87-93, 1993. Makina Mühendisliği Mühendislik Fakültesi Makale SCI-E 1993
Savaş, M.A., Altıntaş, S., “Effects of Squeeze Casting on the Wide Freezing Range Binary Alloys”, Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing, 173, 1-2, 227-231, 1993. Makina Mühendisliği Mühendislik Fakültesi SCI-E, CPCI-S 1993
Ekici, B., Altıntaş, S., “Numerical and Experimental Stress Analyses of Bovine Femur for Determining the Mechanical Properties of Calcium Phosphate Ceramic as an Artificial Bone Implant”, Computational Biomedicine, 333-343, 1993. Makina Mühendisliği Mühendislik Fakültesi Bildiri CPCI-S 1993
Bayraktar, E., Levaillant, C., Altıntaş, S., “Strain Rate and Temperature Effect on the Deformation Behavior of the Original Hadfield Steel”, Journal de Physique IV, 3, C7, 61-66, 1993. Makina Mühendisliği Mühendislik Fakültesi SCI-E, CPCI-S 1993
Savaş, M.A., Altıntaş, S., “The Microstructural Control of Cast and Mechanical Properties of Zinc Aluminum Alloys”, Journal of Materials Science, 28, 7, 1775-1780, 1993. Makina Mühendisliği Mühendislik Fakültesi Makale SCI-E 1993
Türkay, O.S., “An Expert System to Control Humidity and Temperature of a Laboratory Scale Greenhouse”, Mechatronics, 4, 6, 607-615, 1994. Makina Mühendisliği Mühendislik Fakültesi Makale SCI-E 1994
Bayraktar, E., Levaillant, C., Altıntaş, S., “Formability Characterization of Hadfield Steel”, Journal of Materials Processing Technology, 47, 1-2, 13-31, 1994. Makina Mühendisliği Mühendislik Fakültesi Makale SCI-E 1994
Pakdemirli, M., Ulsoy, A.G., Ceranoğlu, A., “Transverse Vibration of an Axially Accelerating String”, Journal of Sound and Vibration, 169, 2, 179-196, 1994. Makina Mühendisliği Mühendislik Fakültesi Makale SCI-E 1994
Santare, M.H., Crocombe, A.D., Anlaş, G., “Anisotropic Effective Moduli of Materials with Microcracks”, Engineering Fracture Mechanics, 52, 5, 833-842, 1995. Makina Mühendisliği Mühendislik Fakültesi Makale SCI-E 1995
Ekici, B., Altıntaş, S., “Elasto Plastic Finite Element Modelling to Determine the Effect of Type of Polymeric Adhesive Formability of Steel Polymeric Adhesive Aluminium (spa) Laminated Composites”, Contact Mechanics II, 217-224, 1995. Makina Mühendisliği Mühendislik Fakültesi Bildiri CPCI-S 1995
Türkay, O.S., Kıray, B., Tuğcu, A.K., Sümer, I.T., “Formulation and Implementation of Parametric Optimization of a Washing Machine Suspension System”, Mechanical Systems and Signal Processing, 9, 4, 359-377, 1995. Makina Mühendisliği Mühendislik Fakültesi Makale SCI-E 1995
Anlaş, G., Santare, M.H., Hall, I.W., “Modeling the Effect of Fiber Breakage on the Elastic Properties of Short Fiber Composites”, Composites Science and Technology, 54, 2, 113-122, 1995. Makina Mühendisliği Mühendislik Fakültesi Makale SCI-E 1995
Örs, H., Prevost, J.H., “On the Well Posedness of the Initial Value Problem in Elasto Plastodynamics for a Linear Comparison Solid”, ACTA Mechanica, 111, 3-4, 181-192, 1995. Makina Mühendisliği Mühendislik Fakültesi Makale SCI-E 1995
Örs, H., “A Finite Element Model for Shallow Water Flow and Contaminant Transport in the Bosphorus Strait”, Computational Fluid Dynamics '96, 8-13, 1996. Makina Mühendisliği Mühendislik Fakültesi Bildiri CPCI-S 1996
Yılmaz, M., Altıntaş, S., “Fabrication of Al Matrix Composites Reinforced with High Contents of Si Particles”, Journal of Materials Science Letters, 15, 23, 2093-2095, 1996. Makina Mühendisliği Mühendislik Fakültesi Makale SCI-E 1996
Tür, Y.K., Vardar, Ö., “Periodic Tensile Overloads in 2024-t3 Al Alloy”, Engineering Fracture Mechanics, 53, 1, 69-77, 1996. Makina Mühendisliği Mühendislik Fakültesi Makale SCI-E 1996
Yılmaz, M., Altıntaş, S., “Production of Hypereutectic Al-Si Alloys by P/M Route”, Aluminium Alloys: Their Physical and Mechanical Properties, 1-3, 217, 1853-1857, 1996. Makina Mühendisliği Mühendislik Fakültesi SCI-E, CPCI-S 1996
Bayraktar, E., Altıntaş, S., “Square Cup Deep Drawing and 2D-draw Bending Analysis of Hadfield Steel”, Journal of Materials Processing Technology, 60, 1-4, 183-190, 1996. Makina Mühendisliği Mühendislik Fakültesi SCI-E, CPCI-S 1996
Yılmaz, M., Altıntaş, S., “A Comparison of Particulate Sic and Al18b4o33 Reinforced Al Matric Composites”, Euromat 97 Proceedings of the 5th European Conference on Advanced Materials and Processes and Applications: Materials, Functionality & Design, 1,387-390, 1997. Makina Mühendisliği Mühendislik Fakültesi Bildiri CPCI-S 1997
Örs, H., “A Contaminant Transport Model for the Bosphorus Strait”, Journal of Environmental Science and Health Part A Environmental Science and Engineering & Toxic and Hazardous Substance Control, 32, 3, 699-714, 1997. Makina Mühendisliği Mühendislik Fakültesi Makale SCI-E 1997
Anlaş, G., Ardıç, E.S., Gediz, A., “Calculation of Effective Moduli of Filament Wound Tubes”, Journal of Reinforced Plastics and Composites, 16, 17, 1566-1574, 1997. Makina Mühendisliği Mühendislik Fakültesi SCI-E, CPCI-S 1997
Savaş, M.A., Erturan, H., Altıntaş, S., “Effects of Squeeze Casting on the Properties of Zn-Bi Monotectic Alloy”, Metallurgical and Materials Transactions A Physical Metallurgy and Materials Science, 28, 7, 1509-1515, 1997. Makina Mühendisliği Mühendislik Fakültesi Makale SCI-E 1997
Savaş, M.A., Altıntaş, S., “A Comparative ınvestigation of the Mechanical Properties and Machinability in Al-Mg Cast Alloys”, Advances in Aluminum Casting Technology, 265-269, 1998. Makina Mühendisliği Mühendislik Fakültesi Bildiri CPCI-S 1998
Babetty, Z., Sümer, A., Altıntaş, S., Ergüney, S., “A Suture-tissue Pullout Model in the Rat Abdominal Wall”, Proceedings of the 1998 2nd International Conference Biomedical Engineering Days, 118-121, 1998. Makina Mühendisliği Mühendislik Fakültesi Bildiri CPCI-S 1998
Babetty, Z., Sümer, A., Altıntaş, S., Ergüney, S., Göksel, S., “Changes in Knot Holding Capacity of Sliding Knots in Vivo and Tissue Reaction”, Archives of Surgery, 133, 7, 727-734, 1998. Makina Mühendisliği Mühendislik Fakültesi Makale SCI-E 1998
Babetty, Z., Sümer, A., Altıntaş, S., Ergüney, S., “Knot Holding Capacity of Sliding Knots Under Dry and in Vivo Conditions”, Proceedings of the 1998 2nd International Conference Biomedical Engineering Days, 122-127, 1998. Makina Mühendisliği Mühendislik Fakültesi Bildiri CPCI-S 1998
Babetty, Z., Sümer, A., Altıntaş, S., “Knot Properties of Alternating Sliding Knots with Different Patterns in Comparison to Alternating and Simple Sliding Knots”, Journal of the American College of Surgeons, 186, 4, 485-489, 1998. Makina Mühendisliği Mühendislik Fakültesi Makale SCI-E 1998
Türkay, O.S., Sümer, I.T., Tuğcu, A.K., Kıray, B., “Modeling and Experimental Assessment of Suspension Dynamics of a Horizontal Axis Washing Machine”, Journal of Vibration and Acoustics-Transactions of the ASME, 120, 2, 534-543, 1998. Makina Mühendisliği Mühendislik Fakültesi Makale SCI-E 1998
Sendemir, A., Altıntaş, S., “Production of Hydroxylapatite Reinforced Polymer Composites for Biomedical Applications”, Proceedings of the 1998 2nd International Conference Biomedical Engineering Days, 114-117, 1998. Makina Mühendisliği Mühendislik Fakültesi Bildiri CPCI-S 1998
Bayraktar, E., Altıntaş, S., “Some Problems in Steel Sheet Forming Processes”, Journal of Materials Processing Technology, 80-1, 83-89, 1998. Makina Mühendisliği Mühendislik Fakültesi Makale SCI-E 1998

Sayfalar